Metrologic USB Driver Install Instructions 1.0
Last Updated September 5, 2002

How to Install the Driver on Windows 98
  If you already have the POSUSB driver installed:
    - Make sure the scanner is plugged in.
    - Click the Start button, select Settings, and click the Control Panel icon.
    - Double click the System icon.
    - Click on the Device Manager tab.
    - Click on the plus box next to USB Point-Of-Sale Devices
    - Click the Serial Interface for POS Device and click the Remove button.
    - Click OK in the Confirm Device Removal box.
    - When prompted to restart your computer, click No.
    - Click on the Metrologic USB converter and click the Properties button.
    - Click the Driver tab.
    - Click the Update Driver button.
    - Click the Next button in the Update Device Driver Wizard.
    - Select Search for a better driver than the one your device is using now, 
      click Next.
    - Check Specify a location and Enter the location where you unzipped the 
      driver or choose browse to find the folder where you unzipped the new 
      driver.  Uncheck all other options and click Next.
    - Click Next after Windows finds a driver to install.
    - After the driver is done installing click Finish.
    - When prompted to restart your computer, click Yes.
    - After the computer restarts, the Add New Hardware Wizard will appear, 
      click Next.
    - Select Search for the best driver for your device, click Next.
    - Check Specify a location and Enter the location where you unzipped the 
      driver or choose browse to find the folder where you unzipped the new 
      driver.  Uncheck all other options and click Next.    
    - Click Next after Windows finds a driver to install.
    - After the driver is done installing, click Finish.

  If you do not have the POSUSB driver installed:
    - Plug the scanner into an open USB port.
    - The Add New Hardware wizard will appear, click Next.
    - Select Search for the best driver for your device, click Next.
    - Check Specify a location and Enter the location where you unzipped the 
      driver or choose browse to find the folder where you unzipped the new 
      driver.  Uncheck all other options and click Next.
    - Click Next after Windows finds a driver to install.
    - After the driver is done installing click Finish.
    - The Add New Hardware wizard will appear again, click Next.
    - Select Search for the best driver for your device, click Next.
    - Check Specify a location and Enter the location where you unzipped the 
      driver or choose browse to find the folder where you unzipped the new 
      driver.  Uncheck all other options and click Next.
    - Click Next after Windows finds a driver to install.
    - After the driver is done installing click Finish.

  If you are upgrading from a previous version of the Metrologic driver:
    - Plug the scanner into an open USB port.
    - Click the Start button, select Settings, and click the Control Panel icon.
    - Double click the System icon.
    - Click on the Device Manager tab.
    - Click the plus box next to Ports (COM & LPT)
    - Right click on the entry representing the scanner and choose properties.
    - Click the Driver tab.
    - Click the Update Driver button.
    - Click Next in the Update Device Driver Wizard.
    - Select Search for a better driver than the one your device is using now,
      and click Next.
    - Check Specify a location and Enter the location where you unzipped the 
      driver or choose browse to find the folder where you unzipped the new 
      driver.  Uncheck all other options and click Next.
    - Click Next after Windows finds the new driver to install.
    - Click Next once the driver has finished installing.
    - Click Next to finish the upgrade process.

Testing the Installation
  - Use a terminal window program (HyperTerminal, Metroset Terminal window) to
    open COM3.
  - Scan a barcode.
  - If the barcode does not appear in the terminal window, switch to COM4
    and try again.
